WSE-87646078

Unit Type: Solar energy system
Peak Power – 1,950 (3) 650Wp
Module Efficiency 21.5%
Battery Type: Valve Regulated Lead Acid
Capacity: (3) 250aH 8D 24V
Number of Cells 54×2
Maximum Power Voltage (Vmpp) 31.02V
Maximum Power Current (Impp) 13.06A
Open Circuit Voltage (Voc) 37.05V
Short Circuit Current (Isc) 13.62A
NOCT 45.0°C
Cell Type Monocrystalline Silicon
Power Temperature Coefficient -0.35% / °C
Current Temperature Coefficient 0.05% / °C
Voltage Temperature Coefficient -0.28% / °C
Maximum System Voltage VDC 1,000
Maximum Fuse Rating 25A
Safety Classification Class 2

The WSE-87646078 is a sustainable energy solution designed for use in hazardous environments. The system is equipped with three 650-watt solar panels and three batteries for energy storage. Power is supplied by three 24V-1000AH 8D batteries, ensuring steady and dependable operation for connected devices.

Simple roof integration with clean, low-profile aesthetic for new build and retrofit
Rapid installation times of less than 45 min/kWp easily achieved
Compatible with the widest range of slate and tile including special fixings for different batten thickness
Fitted during the normal roofing programme, enabling clarity of responsibility and safe working practices
Achieves highest fire rating and wind resistance withoutmodifications to the roof

Design resistance to ultimate loads includes a partial material safety factor of 1.0
Subject to a manufacturing tolerance of +/- 3 %.
Based on aperture area.
Nominal Operating Cell Temperature
Electrical specification measured under standard test conditions: Irradiation 1 kW/m2
with light spectrum AM 1.5 and a cell temperature of 25°C

Mechanical Specification

Mounting: During setup, the solar panels can be fastened to flat surfaces using a skid-mounted frame. The battery enclosure may be installed either on the ground or attached to poles with rear-access U-bolts.

Aperture Area 1.885 m 2
Width 1,134mm
Length 1,722mm
Thickness 70mm
Weight 25.0kg
Battery Type: Valve Regulated Lead Acid
Static roof loading (distributed) 12.8kg / m 2
Characteristic Wind Resistance 4.65kPa
Ultimate Design Load 4.65kPa
Positive Design Load 5.40IEC 61215
Roofing System Fire Rating BROOF (T1, T2, T3, T4) EN 13501-5
Power Warranty 90% 10 years, 80% 25 years
Product Warranty 15 years
Standards Class I, Division 2
Structural Durability Equivalent to roof structure

Applications: remote monitoring stations; oil and gas well sites; refineries; gas processing and compression facilities; chemical and petrochemical plants; water and wastewater treatment facilities; renewable energy sites; pipeline monitoring stations; mining operations; agricultural operations; grain storage and handling facilities; transportation infrastructure; utility substations; and other off-grid or low-access industrial locations.

Type: Emergency Battery Pack

Dimensions: 12.00″ x 12.00″ x 6.00″